motor frame
英 [ˈməʊtə(r) freɪm]
美 [ˈmoʊtər freɪm]
网络 汽车车架; 机座; 电机架
双语例句
- The motor frame is welded steel plate structure and horizontal type.
该系列电机为钢板焊接机座，卧式结构。 - Glass medicine bottle and electric motor frame were chosen to be studied as they are typical representatives in industry.
课题分别以玻璃药瓶和电机机座作为研究对象，因为这二种对象，在工农业生产中具有代表性。 - The unit is composed of inlet outlet hopper sieve, motor vibrator and frame.
该机由进出料斗筛部、电机振动部、机体座三大部分组成。 - A new type high-reliability permanent magnet motor frame is presented against low reliability in traditional motors.
针对传统电机可靠度较低的状况，提出一种新型结构的高可靠性永磁直流电机； - Effect of motor suspended on frame or wheel-set on locomotive axle load transfer
电机架悬及轴悬对机车轴重转移的影响 - The second test aims to a motor frame, we can conclude from the experiment that the instrument can analyze multiple modes of complex structure and display its modal vibration shapes.
其次对一摩托车架进行了试验模态分析，试验表明仪器能较好地分析出车架的多阶模态，并显示出其模态振型。 - Reason analysis and countermeasures of the crack occured on NYJ_1 motor car frame
NYJ1型动车构架裂纹分析与处理方案 - Coherence Analysis and Research on the Damage Cause of Traction motor Brush frame in Axle suspension Locomotive
相干分析方法及轴悬式机车电机刷架损坏原因的研究 - In view of characteristic of assembly of motor frame, improvement on the construction of its assembling positioner is put forward, thus raising the working efficiency, saving the covering area, and improving the apparent quality of product.
针对电机机座装配的特点，提出了改进其装配胎具的结构，从而提高了劳动效率，节约占地面积，提高了产品的表观质量。 - Quality Analysis of Burn-on Sand on Casting of Motor Frame
电机机座铸件粘砂的质量分析 - Axle load transfer of C_0-C_0 locomotive with wheel-set quill and motor suspended on frame or wheel-set will be studied and calculated.
对采用轮对空心轴架悬与电机轴悬的C0-C0轴式机车轴重转移进行了理论分析及计算。 - Parametric Design System of Motor Frame Based on Feature
基于特征的摩托车车架参数化设计系统 - Optimum Design of Constructional Parameters for Motor Vehicle Frame
汽车车架结构参数的优化设计 - The phenomenon of the crack occured on NYJ_1 motor car frame is described. The reasons for the crack are analysed and the countermeasures are given.
介绍了NYJ1型动车构架裂纹概况，分析了裂纹产生的原因，确定了处理方案，使构架裂纹得到修复。 - This paper introduces the control system's platform, the hardware's modules, the method to transplant the embedded Linux OS and the arithmetic of the coordinate motion between the principal axis motor and the frame motor.
本文详细地介绍了电脑绣花机控制系统的构建原理、硬件架构的各个组成模块及其嵌入式操作系统的构建过程，设计了主轴电机和绣筐电机的配合运动控制算法。 - An Even Analysis and Experimental Study of Dynamic Stresses in Motor Vehicle Frame
汽车车架动应力匀化分析与实验研究 - The stator of the motor has the cooling structure by water flowing inside the wall of the motor frame.
该电机的定子为机座内壁通水冷却结构。 - Motor frame intensity analysis system research and design
摩托车车架强度分析系统的研究与开发 - Analyses of the Motor-frame by Finite Elements
用有限元法对摩托车车架强度的分析 - Under the guidance of this method, the motor frame parametric design system based on SolidWorks is developed by Delphi program language.
以此为指导，利用Delphi开发了基于SolidWorks平台的摩托车车架参数化设计系统。 - The Structural Property and Operating Principle of Building-up Encoder A Combined Forming Die for Motor Vehicle Frame
组合编码器的结构和原理汽车纵梁成形组合模具 - For motor frame, circles in the matter brim was detected by means of Hough Transform and then concentricity tolerance was determined.
对于电机机座图像，采用Hough变换方法，检测出图像包含的圆，进而求出同心度等公差。 - This paper studies the stator vibration of an induction motor with square frame, and presents a novel multi-degree vibrating model which is superior to the conventional double-ring one.
对方形机壳异步电动机的定子振动分析模型作了研究，给出了一种比双环模型更适用的多自由度模型，并对典型结构的方形异步电机进行了实际分析。 - Analyses for Stator Vibration of Induction Motor with Square Frame
方形异步电机定子振动分析 - For the motor frame model, there is Bolted Joint Surface between the cover and the frame, the frame and the base.
在电机机座模型中，螺栓结合面存在于电机端盖和圆筒、圆筒与底座之间。 - For the controlled object ( motor and tracking frame) and model identification, the key of this part is making full use of the advantages of digital servo controller, using the frequency domain method to get the exact mathematical model.
对被控对象（电机与跟踪架）进行了模型辨识，重点在于充分利用全数字化伺服控制器的优点，运用频域方法得到准确的数学模型。 - A typical motor frame is chosen as the study object. In the FE-modeling, the spring-damping elements are built on the bolt-joint surface.
选择典型电机机座为研究对象，建立其有限元模型时，在螺栓连接结合面处使用弹簧-阻尼单元，代入结合面参数。